OPSO Regulator

PRODUCT CATEGORY

The OPSO (Over Pressure Shut-Off) safety device cuts off the gas flow in the event of abnormal over pressure that can be caused by an operating fault or defect in installation. This is to safeguard the gas appliances when there is a surge of over pressure. To reset, simply unscrew the OPSO knob and pull it slowly until the safety valve reopens.

Technical Data:

BP 2203 OPSO

BP 2303 OPSO

Model	BP 2203 OPSO	BP 2303 OPSO
Capacity	10.5 kg/hr 500,000 btu/hr	30 kg/hr 1,400,000 btu/hr
Inlet Pressure	0.2 – 2 bar	0.5 – 4 bar
Outlet Pressure	29 mbar	27 – 36 mbar
Inlet Connection	½” NPT	½” NPT
Outlet Connection	½” NPT	¾” NPT
Application	✓ Generally used in domestic or commercial LPG installation with second stage function. ✓ The Vent “GIRO” ring provides best protection against water penetration and drainage of humidity condensation.	Mainly used in medium power LPG installation such as domestic, commercial or industrial set up.

BP2402 OPSO

BP 2403 OPSO

Model	BP 2402 OPSO	BP 2403 OPSO
Capacity	35 kg/hr 1,650,000 btu/hr	50 kg/hr 1,880,000 btu/hr
Inlet Pressure	0.5 – 2 bar	0.5 – 2 bar
Outlet Pressure	25 – 45 mbar	24 – 41 mbar
Inlet Connection	¾” NPT	¾” NPT
Outlet Connection	1” NPT	1” NPT
Application	Used in large power installation as a final stage or intermediate stage regulator	Mainly used in high power commercial or industrial installation

Model	BP 2203 OPSO
Capacity	10.5 kg/hr 500,000 btu/hr
Inlet Pressure	0.2 – 2 bar
Outlet Pressure	29 mbar
Inlet Connection	½” NPT
Outlet Connection	½” NPT
Application	✓ Generally used in domestic or commercial LPG installation with second stage function. ✓ The Vent “GIRO” ring provides best protection against water penetration and drainage of humidity condensation.

Model	BP 2303 OPSO
Capacity	30 kg/hr 1,400,000 btu/hr
Inlet Pressure	0.5 – 4 bar
Outlet Pressure	27 – 36 mbar
Inlet Connection	½” NPT
Outlet Connection	¾” NPT
Application	Mainly used in medium power LPG installation such as domestic, commercial or industrial set up.

Model	BP 2402 OPSO
Capacity	35 kg/hr 1,650,000 btu/hr
Inlet Pressure	0.5 – 2 bar
Outlet Pressure	25 – 45 mbar
Inlet Connection	¾” NPT
Outlet Connection	1” NPT
Application	Used in large power installation as a final stage or intermediate stage regulator

Model	BP 2403 OPSO
Capacity	50 kg/hr 1,880,000 btu/hr
Inlet Pressure	0.5 – 2 bar
Outlet Pressure	24 – 41 mbar
Inlet Connection	¾” NPT
Outlet Connection	1” NPT
Application	Mainly used in high power commercial or industrial installation

You are welcome to contact us on Whatsapp for product enquiries or come visit us at our store directly.

OPSO Regulator

CERGAS SOLUTION SDN. BHD.